About
How it started...
One day she said: "Tim, I would like a raised bed garden" and after looking around I found that most raised garden beds were made from wood and even the best wood did not last long. I only wanted to do this once so I set about developing a more permanent solution, being in the concrete industry for many years I designed a concrete mold and refined the process until I came up with the perfect interlocking concrete block. Our unique interlocking blocks are made from concrete using a precise mold so each block fits perfectly into the next. They will not rot like wood and require zero maintenance.
Installation Instructions
1.) Measure out area where you would like your Everlasting Garden to be. Keep in mind that Everlasting Garden blocks are in 16” increments.
(So a garden can be 16”W by 48”L or 64”W by 112”L) Whatever size you decide to make it in 16” increments.
3.) Start on a corner and install 2 Everlasting Garden blocks with the male end nesting into the female end.
5.) Next install the Everlasting Garden blocks to finish out your Everlasting Garden.
7.) Once Everlasting Garden bed has been assembled then fill with soil and plant your Everlasting Garden!!
2.) Flatten out the area where your Everlasting Garden will be located. Make sure you flatten area a few inches extra on each side to work with.
4.) Make sure blocks are fitting as tight as possible and relatively square. You may have to use hammer to tap steel bar through the holes so it is flush to the top of the blocks.
6.) It doesn’t really matter which way you go (Clockwise or Counter Clockwise) on your install. Once the steel rods are installed the Everlasting Garden Blocks should be adjusted to their proper position.
Upgrade your Garden
Looking for the longest lasting raised garden beds?